Product search
rSYS DN25 2x4 LH-a
Accessories needed
|
ST DN25 AD100 P40 LL 5001008 |
|
ST DN25 AD100 P40 LL001006 |
Recommended accessories
DÜV DN15 2x2 MUL set L001344 |
Configure product variant
Nominal width
Performance class
Kvs = 6.2 V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT) with ST DN25:
Kvs = 5.7 V'max[100mbar] = 1.8m³/h
Q'max[10K] = 21kW
Flow direction producer
Pump flange
Product documentation
Assembly instructions
Assembly instructions: For specialist partners only.
Please log in here or register here
Actuator multi-way mixer: For specialist partners only.
Please log in here or register here
Spare parts drawing
Spare parts drawing For specialist partners only.
Please log in here or register here
Data sheet
GAEB
Tender text
Baunach article master data Version: 19.11.24
BAFA funding opportunity within the scope of heating system optimisation by replacing heating circulating pumps with high-efficiency circulating pumps.
rendeMIX multi-port mixing manifold with 3/2-way tangential mixing valve DN25×G1½(a) MsGuss (adapter red), plug and cover Ms58
For highly efficient utilisation of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control at a condensing boiler, a stratified storage tank or a heat transfer station.
Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s
Dual circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, CuØ35×1, DN32×G1½(a) flat, pipe spacing 100mm.
2 integrated gravity brakes/backflow preventer, Dp10mbar
Direct heating circuit (HT): Kvs = 6.2 - V'max[100mbar] = 2m³/h - Q'max[20K] = 47kW - Mixed heating circuit (LT) with ST DN25: Kvs = 5.7 - V'max[100mbar] = 1.8m³/h - Q'max[10K] = 21kW - Leakage rate < 0,1%
6 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58
6 ball valve unions, DN25 passage, PN32, G1½(i)×Rp1 flat-sealing, stuffing box, sealing hole, spindle with aluminium wing handle
Insulating moulded tray EPP 40g/l, black, 450×450mm, quick assembly kit
Without pump flanges
Assembly does NOT include pump compensator - PAS L180 (Part No.: 001 338)
With built-in high-efficiency Grundfos UPM3 pump, DN25, 130mm, H 5-6mWS, 230V~ 50Hz, 2m connection cable, EEI < 0,2
Model DN 25 - light version, PN 10bar, Tmax 120°C
ATTENTION: CANNOT BE USED WITHOUT SYSTEM SEPARATION!
Performance data
Direct heating circuit (HT): Kvs = 6.2 - V'max[100mbar] = 2m³/h - Q'max[20K] = 47kW - Mixed heating circuit (LT) with ST DN25: Kvs = 5.7 - V'max[100mbar] = 1.8m³/h - Q'max[10K] = 21kW - Leakage rate < 0,1%