Product search
rSYS DN25 2x4 LT 1-a
Accessories needed
|
ST DN25 AD100 P40 RR 5001009 |
|
ST DN25 AD100 P40 RR001007 |
Configure product variant
Nominal width
Performance class
Kvs = 6.5 V'max[100mbar] = 2.1m³/h
Q'max[20K] = 49kW
Additional mixing circuit (NT) with ST DN25:
Kvs = 5.7 V'max[100mbar] = 1.8m³/h
Q'max[10K] = 21kW
Flow direction producer
Pump flange
Product documentation
Assembly instructions
Assembly instructions: For specialist partners only.
Please log in here or register here
Actuator multi-way mixer: For specialist partners only.
Please log in here or register here
Spare parts drawing
Spare parts drawing For specialist partners only.
Please log in here or register here
Data sheet
GAEB
Tender text
Baunach article master data Version: 19.11.24
BAFA funding opportunity within the scope of heating system optimisation by replacing heating circulating pumps with high-efficiency circulating pumps.
rendeMIX multi-port mixing manifold with 3/2-way tangential mixing valve DN25×G1½(a) MsGuss (adapter red), plug and cover Ms58
TWIN assembly for the expansion of a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control
Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s
Dual circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, CuØ35×1, DN32×G1½(a) flat, pipe spacing 100mm.
1 integrated gravity brake/backflow preventer, Dp10mbar
Downstream assembly (HT): Kvs = 6.5 - V'max[100mbar] = 2.1m³/h - Q'max[20K] = 49kW - Additional mixing circuit (LT) with ST DN25: Kvs = 5.7 - V'max[100mbar] = 1.8m³/h - Q'max[10K] = 21kW - Leakage rate < 0,1%
4 thermometers 0-120°C, Ø63mm, soldering sleeves Ms58
2 ball valve screw connections, DN25 passage, PN32, G1½(i)×Rp1 flat-sealing, stuffing box, sealing hole, spindle with aluminium wing handle
Insulating moulded tray EPP 40g/l, black, 450×450mm, quick assembly kit
With pump flange G1½(i) for pump DN25 on heat generator flow (1)
Assembly does NOT include pump compensator - PAS L180 (Part No.: 001 338)
With built-in high-efficiency Grundfos UPM3 pump, DN25, 130mm, H 5-6mWS, 230V~ 50Hz, 2m connection cable, EEI < 0,2
Model DN 25 - light version, PN 10bar, Tmax 120°C
ATTENTION: CANNOT BE USED WITHOUT SYSTEM SEPARATION!
Performance data
Downstream assembly (HT): Kvs = 6.5 - V'max[100mbar] = 2.1m³/h - Q'max[20K] = 49kW - Additional mixing circuit (LT) with ST DN25: Kvs = 5.7 - V'max[100mbar] = 1.8m³/h - Q'max[10K] = 21kW - Leakage rate < 0,1%