rSYS DN25s 2x4 RT 15

Item no. 001 159 Return flow utilisation
TWIN assembly for the expansion of a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control

Accessories needed

								

ST DN25s AD100 P60 LL 5

001108
								

ST DN25s AD100 P60 LL

001106

Recommended accessories

								

ISO KuHV DN25s G1½(i)xRp1

996085

Further information?

Further questions?

Contact technical support
					

Configure product variant

Nominal width

DN25s

Performance class

Downstream assembly (HT):
Kvs = 13.9 • V'max[100mbar] = 4.4m³/h
Q'max[20K] = 102kW
Additional mixing circuit (NT) with ST DN25s:
Kvs = 7.2 • V'max[100mbar] = 2.3m³/h
Q'max[10K] = 27kW

Flow direction producer

Flow direction Producer Right

Product documentation

Assembly instructions

Assembly instructions: For specialist partners only.
Please log in here or register here

Actuator multi-way mixer: For specialist partners only.
Please log in here or register here

Spare parts drawing

Spare parts drawing For specialist partners only.
Please log in here or register here

Data sheet

001159_DBL_2021-11-04.pdf

GAEB

001159.D81

Tender text

Baunach article master data Version: 19.11.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX multi-port mixing manifold with 3/2-way tangential mixing valve DN25×G1½(a) MsGuss (adapter green), plug and cover Ms58

TWIN assembly for the expansion of a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control

Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s

Dual circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, CuØ35×1, DN32×G1½(a) flat, pipe spacing 100mm.

2 integrated gravity brakes/backflow preventer, Dp10mbar

Downstream assembly (HT): Kvs = 13.9 - V'max[100mbar] = 4.4m³/h - Q'max[20K] = 102kW - Additional mixing circuit (LT) with ST DN25s: Kvs = 7.2 - V'max[100mbar] = 2.3m³/h - Q'max[10K] = 27kW - Leakage rate < 0,1%

4 thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

2 ball valve unions, DN25s passage, PN20, G1½(i)×Rp1 flat-sealing, stuffing box, spindle with aluminium T-handle

Insulating moulded tray EPP 40g/l, black, 450×450mm, quick assembly kit

With pump flanges G1½(i) for pumps DN25 at the heat generator flow (1) and mixing circuit flow (5)

Assembly includes TWO pump balancers - PAS L180 - with G1½(a)×G1½(i) fittings for balancing a pump DN25, length 180mm, insulated (part no.: 001 338).

Assembly does not contain a pump

Model DN 25 - strong version, PN 10bar, Tmax 120°C

ATTENTION: CANNOT BE USED WITHOUT SYSTEM SEPARATION!

Performance data

Downstream assembly (HT): Kvs = 13.9 - V'max[100mbar] = 4.4m³/h - Q'max[20K] = 102kW - Additional mixing circuit (LT) with ST DN25s: Kvs = 7.2 - V'max[100mbar] = 2.3m³/h - Q'max[10K] = 27kW - Leakage rate < 0,1%

Baunach